08.00 - 09.00 Poster Set-up
15.00 - 16.00 Poster session
after 17.00 Poster Tear-down
Pres# Presenter Title
125 Arlom,R.
Influence of modified surfaces on the bond strength
of ceramic fused to a CoCr alloy.
126 Baltzer,N.
Potentio-dynamic corrosion measurements on precious
ceramic-fused-to-metal alloys in different
metallurgical states.
127 Bickel,M.
Effect of palladium-based, gold-reduced and
high-gold alloys on keratinocyte and fibroblast
proliferation.
128 Biffar,R.
Clinical evaluation of duceragold-pfm-restorations
over a period of 36 months.
129 Blume,A.
Microscopical and microanalytic studies in the
titanium-ceramic-interface.
130 Borchers,L.
Surface quality and strength of temporary crown and
bridge resins.
131 Carek,V.
Loss of the retention force in cast clasps and
telescoping crowns.
132 Diedrichs,G.
Fracture strength of provisional bridges - influence
of metal reinforcement.
133 Dönmez,F.
Topological aspects of four metal alloy surfaces
created by silicon carbide discs.
134 Esser,M.
Biological and mechanical properties of bovine
versus human dentin with regard to in vitro
investigations of dentin adhesives.
135 Alkumru,H.N.
Thermal cycling distortion of three-unit
porcelain-fused-to metal-fixed partial dentures.
136 Faber,F.-J.
Deformation of galvano ceramic crowns after ceramic
firing.
137 Fischer,J.
Mechanical strength and durability of some newly
developed compomeres.
138 Gente,M.
A new dental training alloy for metal ceramic
restaurations.
139 Golebiewska,M.
Affectional state and acceptance of dentures in
elderly patients.
140 Heide,S.
Influence of metal cleaning methods on resin bond
strength.
141 Höhnel,U.
Consideration of in-vitro tests for porcelain
adherence to cast titanium.
142 Husstedt,H.
Exploring pulpal anatomy with high-resolution
computed tomography.
143 Kazazoglu,E.
An Effect of Mouth Spray on a Denture
Microorganisms.
144 Kern,M.
Appearance of anterior teeth and gender as judged by
dentists.
145 Kocabalkan,E.
Necessity for routine roentgenographic examination
of the edentulous patient.
146
Withdrawal
147 Kulak,Y.
A Survey for the Elderly Subjects in Istanbul.
148 Leeming,B.
Dynamic-mechanical behavior of bovine dentine before
and after cryopreservation.
149 Lindemann,W.
Microstructure and phase analysis of the
laser-welded joint between precious and non-precious
dental alloys.
150 Mack,F.
Development of a bridge frame out of galvanogold.
151 Menzel,H.
Correlation between facial shape and tooth shape.
152 Müller,S.
Granular Cell Tumor (Abrikossoff-Tumor) of the
Tongue.
153 Neckrashevych,Y.
Objective colouridentification as an important stage
in the process of dental restoration.
154 Patyk,A.J.
The Effect of Fluoride Prophylactic Agents on
Different Types of Titanium.
155 Paulzen,J.
Low Crack Growth in All Ceramic Materials: Toughness
Distribution, Weibull Analysis and Long Time
Durability.
156 Pospiech,P.
Clinical investigation of a new compomer luting
cement in comparison with a zinc phosphate cement:
Preliminary results.
157 Schimmang,A.
Statical and Dynamical Bend Strength of All Ceramics
Materials: Life Time Analysis.
158 Schmidt,M.
Possibilities to quench-age veneering
plastics-results of an in vivo study.
159 Schultz,I.
Correlation of biocorrosion and precious metal
content in dental alloys.
160 Sertgöz,A.
The Effect of Superstructure Material on Stress
Distribution in an Implant-Supported Fixed
Prosthesis.
161 Siebert,G.
Titanium-ceramic-bonding dependant on the exact
melting point of the ceramic.
162 Simonis,A.
Plaque bacteria counts and viability on different
dental materials.
163 Stiefenhofer,A.
Evidence for 2-dimensional finite-element-analysis
of endodontic post and cores.
164 Strietzel,R.
Corrosion of orthodontic wires under chemical and
mechanical stress.
165 Szabo,G.
Long term effect of different storage for denture
base material.
166 Tinschert,J.
Bond Strength and Durability under Corrosive Load of
Recent Dentin Bonding Agents.
167 Uludag,B.
Increment of Bonding Strength of Varilus Cements.
168 Vacek,J.
Plast-press JV, the high pressure flask for
processing plastic materials.
169 Vallittu,P.K.
The inhibiting effect of oxygen on polymerization of
glass-fibre - PMMA composite.
170 Vojvodic,D
Image analysis system in dental materials research.
171 Wichmann,M.
Nondestructive testing of dental workpieces using a
microfocus x-ray tube.
172 Zabek,B.
An examination of clinical glove perforations in
dental practice.
173 Zivko-Babic,J.
Quantitative analysis of IPS-Empress ceramic
microstructure.
174 Tzortzopoulou,E.
Thermal behaviour of glass ionomer and resin type
cements.
175 Bairami,V.
All ceramic posts and cores for endodontically
treated front teeth.
176 Gürbüz,A.
Esthetic Considerations for the Clasp Design of
Removable Partial Dentures.
177 Özkan,P.
Measurement of Surface Deformation of Soft Tissue
for Edentulous Patients after Preprosthetic Surgical
Procedures.
178 Rinke,S.
Effects of argon protected firing on the bond
strength of 3 titanium ceramic systems.